Coffee Setup Guide
Breville Barista Touch

Breville Barista Touch

54mm
Moderate ecosystemBeginner ★★★★★Machine $600–$1000Touchscreen 54mm all-in-one with a friendly aftermarket
Tamper:
53mm or 54mm
Portafilter:
spouted
Stock:
Ships with both a 54mm single-wall (non-pressurized) and a dual-wall (pressurized) 18g double basket; the single-wall is intended for use with the built-in grinder.
First upgrades:
Filter basket -> Tamper -> Bottomless portafilter
Avoid:
Some 54mm IMS and Normcore baskets are listed as fitting the Barista Touch but explicitly note they do NOT fit Breville's 'JET' model, so a basket that fits the BES880 is not interchangeable with a JET machine, and a part sold specifically for the JET or Barista Touch Impress (BES881) line is likewise not guaranteed to fit the BES880 - always look for BES880 or Barista Touch named in the listing. This is a 54mm machine, so 58mm portafilters, baskets, tampers and distributors do not fit; buy 54mm parts only. Third-party bottomless portafilters and precision baskets change extraction behavior versus the pressurized stock basket, so expect to re-dial grind and dose.
Last checked:
2026-07-01
Check price on Amazon →

Before you buy

Buy first
  • Filter basket - A 54mm single-wall or precision basket (e.g. IMS B62, Normcore) replaces the pressurized dual-wall basket so you can dial in real espresso; it is the single most impactful change on this machine.
Skip for now
  • A second pressurized or dual-wall basket, since the machine already ships with one.
  • A standalone burr grinder, because the built-in conical grinder is enough to start.
  • Puck screens and cosmetic add-ons until single-wall basket, tamp and distribution are dialed in.
Avoid
58mm accessories of any kind, they do not fit this 54mm machine.Parts marketed specifically for the Barista Touch Impress (BES881) or 'Jet' models, which are different machines.Relying on the dual-wall pressurized basket if your goal is to dial in flavor.
Common wrong buys: Leaving the dual-wall (pressurized) basket in while grinding fresh beans, then being unable to dial in flavor because the pressurized basket hides grind and dose errors. · Skipping the included razor dose-trimming tool and the correct grind size, which leads to over- or under-dosed pucks and channeling. · Trying to brew and steam at the same time; the single-boiler ThermoJet has to switch modes, so you wait between pulling a shot and steaming milk. · Ignoring the touchscreen descale and flush alerts, letting scale build up in the thermocoil, especially on hard water. · Never running the cleaning-tablet backflush cycle with the supplied disc, so oils clog the group over time.
See the full upgrade path →

Our reasoned guidance for the Breville Barista Touch, based on its 54mm group spec and manufacturer info - not a sponsored ranking.

Upgrade order: Filter baskets → Tampers → Bottomless portafilters → WDT tools → Milk jugs → Cleaning discs → Scales → Puck screens
Your Breville Barista Touch grinds already — a standalone grinder is optional, but if you want to upgrade, see espresso grinders by budget →

Compare alternatives under $1000, ranked by accessory ecosystem →

All Breville machines and their shared ecosystem →

Plan your Breville Barista Touch upgrades step by step →

Affiliate disclosure: this page contains affiliate links. If you buy through them we may earn a commission at no extra cost to you. We have not physically tested these products; all compatibility analysis is based on manufacturer specifications and publicly available listing data. "Seller-claimed" means a marketplace listing asserts the fit; it is not manufacturer-confirmed. Verify size against your machine before purchase.

Guides

Filter baskets

Full guide →
IMS Precision 18-22 g filter basket B62.52TH28E compatible with 54mm Breville Sage Express, Bambino, Bambino Plus, Barista Pro, Impress, Barista Touch, Infuser. Doesn't fit JET model
★ Buy first
IMS Precision 18-22 g filter basket B62.52TH28E compatible with 54mm Breville Sage Express, Bambino, Bambino Plus, Barista Pro, Impress, Barista Touch, Infuser. Doesn't fit JET model
Fits the 54mm group seller says it fits 54mm $25–$50
Why: Size matches the 54mm Breville Barista Touch group. Listing names a Breville model or machine it claims to fit.
⚠ Check first: Some 54mm IMS and Normcore baskets are listed as fitting the Barista Touch but explicitly note they do NOT fit Breville's 'JET' model, so a basket that fits the BES880 is not interchangeable with a JET machine, and a part sold specifically for the JET or Barista Touch Impress (BES881) line is likewise not guaranteed to fit the BES880 - always look for BES880 or Barista Touch named in the listing.
Check price on Amazon
Report compatibility issue
54mm Stainless Steel Portafilter for Bambino, Double Spouts Portafilter with Filter Basket Removal Tool Compatible for Breville Bambino, Bambino Plus, Barista Express, Barista Pro and Infuser
★ Buy first
54mm Stainless Steel Portafilter for Bambino, Double Spouts Portafilter with Filter Basket Removal Tool Compatible for Breville Bambino, Bambino Plus, Barista Express, Barista Pro and Infuser
Fits the 54mm group seller says it fits 54mm
Why: Size matches the 54mm Breville Barista Touch group. Listing claims compatibility with Breville machines.
⚠ Check first: Some 54mm IMS and Normcore baskets are listed as fitting the Barista Touch but explicitly note they do NOT fit Breville's 'JET' model, so a basket that fits the BES880 is not interchangeable with a JET machine, and a part sold specifically for the JET or Barista Touch Impress (BES881) line is likewise not guaranteed to fit the BES880 - always look for BES880 or Barista Touch named in the listing.
Check price on Amazon
Report compatibility issue
[1 Pack] Dual Wall Filter Basket 2 Cup,18–22g,double shot basket, Compatible with 54mm Breville Sage Espresso Machines (Express, Bambino, Bambino Plus, Barista Pro, Impress, Barista Touch, Infuser)
★ Buy first
[1 Pack] Dual Wall Filter Basket 2 Cup,18–22g,double shot basket, Compatible with 54mm Breville Sage Espresso Machines (Express, Bambino, Bambino Plus, Barista Pro, Impress, Barista Touch, Infuser)
Fits the 54mm group seller says it fits 54mm Under $25
Why: Size matches the 54mm Breville Barista Touch group. Listing names a Breville model or machine it claims to fit.
⚠ Check first: Some 54mm IMS and Normcore baskets are listed as fitting the Barista Touch but explicitly note they do NOT fit Breville's 'JET' model, so a basket that fits the BES880 is not interchangeable with a JET machine, and a part sold specifically for the JET or Barista Touch Impress (BES881) line is likewise not guaranteed to fit the BES880 - always look for BES880 or Barista Touch named in the listing.
Check price on Amazon
Report compatibility issue
IMS Precision 20 g filter basket B62.52TH26E compatible with 54mm Breville Sage Espresso machines Express, Bambino, Bambino Plus, Barista Pro. Doesn't fit JET models
★ Buy first
IMS Precision 20 g filter basket B62.52TH26E compatible with 54mm Breville Sage Espresso machines Express, Bambino, Bambino Plus, Barista Pro. Doesn't fit JET models
Fits the 54mm group seller says it fits 54mm Under $25
Why: Size matches the 54mm Breville Barista Touch group. Listing claims compatibility with Breville machines.
⚠ Check first: Some 54mm IMS and Normcore baskets are listed as fitting the Barista Touch but explicitly note they do NOT fit Breville's 'JET' model, so a basket that fits the BES880 is not interchangeable with a JET machine, and a part sold specifically for the JET or Barista Touch Impress (BES881) line is likewise not guaranteed to fit the BES880 - always look for BES880 or Barista Touch named in the listing.
Check price on Amazon
Report compatibility issue
18gr IMS Precision NANOTECH Filter Basket compatible with 54mm Breville Sage Espresso machines Express, Bambino Plus, Impress, Barista Touch, Infuser, Duo Temp. (24NT). Doesn't fit JET models
★ Buy first
18gr IMS Precision NANOTECH Filter Basket compatible with 54mm Breville Sage Espresso machines Express, Bambino Plus, Impress, Barista Touch, Infuser, Duo Temp. (24NT). Doesn't fit JET models
Fits the 54mm group seller says it fits 54mm $25–$50
Why: Size matches the 54mm Breville Barista Touch group. Listing names a Breville model or machine it claims to fit.
⚠ Check first: Some 54mm IMS and Normcore baskets are listed as fitting the Barista Touch but explicitly note they do NOT fit Breville's 'JET' model, so a basket that fits the BES880 is not interchangeable with a JET machine, and a part sold specifically for the JET or Barista Touch Impress (BES881) line is likewise not guaranteed to fit the BES880 - always look for BES880 or Barista Touch named in the listing.
Check price on Amazon
Report compatibility issue
Crema Coffee Products 54mm Filter Basket | Single Shot Non-Pressurized Stainless Steel Basket | Compatible with Breville 54mm Portafilters | Precise Tapered Profile for Consistent Espresso Shots
★ Buy first
Crema Coffee Products 54mm Filter Basket | Single Shot Non-Pressurized Stainless Steel Basket | Compatible with Breville 54mm Portafilters | Precise Tapered Profile for Consistent Espresso Shots
Fits the 54mm group seller says it fits 54mm Under $25
Why: Size matches the 54mm Breville Barista Touch group. Listing claims compatibility with Breville machines.
⚠ Check first: Some 54mm IMS and Normcore baskets are listed as fitting the Barista Touch but explicitly note they do NOT fit Breville's 'JET' model, so a basket that fits the BES880 is not interchangeable with a JET machine, and a part sold specifically for the JET or Barista Touch Impress (BES881) line is likewise not guaranteed to fit the BES880 - always look for BES880 or Barista Touch named in the listing.
Check price on Amazon
Report compatibility issue

Tampers

Full guide →
54mm Espresso Tamper, Triple Spring Loaded Tamper, Coffee Tamper with Stainless Steel Ripple Base, Self Leveling Tamper for Barista, Compatible with 53mm/54mm Breville Portafilter
54mm Espresso Tamper, Triple Spring Loaded Tamper, Coffee Tamper with Stainless Steel Ripple Base, Self Leveling Tamper for Barista, Compatible with 53mm/54mm Breville Portafilter
Fits the 54mm group seller says it fits 53/54mm $25–$50
Why: Size matches the 54mm Breville Barista Touch group. Listing claims compatibility with Breville machines.
⚠ Check first: Some 54mm IMS and Normcore baskets are listed as fitting the Barista Touch but explicitly note they do NOT fit Breville's 'JET' model, so a basket that fits the BES880 is not interchangeable with a JET machine, and a part sold specifically for the JET or Barista Touch Impress (BES881) line is likewise not guaranteed to fit the BES880 - always look for BES880 or Barista Touch named in the listing.
Check price on Amazon
Report compatibility issue
54mm Espresso Tamper for Breville Machine Rosewood KNODOS Auto Leveling, Double Spring Loaded Wooden 30LB Calibrated Coffee Tamper
54mm Espresso Tamper for Breville Machine Rosewood KNODOS Auto Leveling, Double Spring Loaded Wooden 30LB Calibrated Coffee Tamper
Fits the 54mm group seller says it fits 54mm $25–$50
Why: Size matches the 54mm Breville Barista Touch group. Listing claims compatibility with Breville machines.
⚠ Check first: Some 54mm IMS and Normcore baskets are listed as fitting the Barista Touch but explicitly note they do NOT fit Breville's 'JET' model, so a basket that fits the BES880 is not interchangeable with a JET machine, and a part sold specifically for the JET or Barista Touch Impress (BES881) line is likewise not guaranteed to fit the BES880 - always look for BES880 or Barista Touch named in the listing.
Check price on Amazon
Report compatibility issue
54mm Espresso Tamper For Breville Machines Calibrated Tamper Tool Espresso Walnut, Self Leveling and 30lb Spring Loaded Design Coffee Tamper With Stainless Steel 53.35mm Ripple Base
54mm Espresso Tamper For Breville Machines Calibrated Tamper Tool Espresso Walnut, Self Leveling and 30lb Spring Loaded Design Coffee Tamper With Stainless Steel 53.35mm Ripple Base
Fits the 54mm group seller says it fits 54mm $25–$50
Why: Size matches the 54mm Breville Barista Touch group. Listing claims compatibility with Breville machines.
⚠ Check first: Some 54mm IMS and Normcore baskets are listed as fitting the Barista Touch but explicitly note they do NOT fit Breville's 'JET' model, so a basket that fits the BES880 is not interchangeable with a JET machine, and a part sold specifically for the JET or Barista Touch Impress (BES881) line is likewise not guaranteed to fit the BES880 - always look for BES880 or Barista Touch named in the listing.
Check price on Amazon
Report compatibility issue
IKAPE 53.3mm Espresso Tamper, Premium Barista Coffee Tamper with Calibrated Spring Loaded, Threaded Stainless Steel Base Tamper Fits for Breville Series 54mm Portafilter Basket
IKAPE 53.3mm Espresso Tamper, Premium Barista Coffee Tamper with Calibrated Spring Loaded, Threaded Stainless Steel Base Tamper Fits for Breville Series 54mm Portafilter Basket
Fits the 54mm group seller says it fits 54mm $25–$50
Why: Size matches the 54mm Breville Barista Touch group. Listing claims compatibility with Breville machines.
⚠ Check first: Some 54mm IMS and Normcore baskets are listed as fitting the Barista Touch but explicitly note they do NOT fit Breville's 'JET' model, so a basket that fits the BES880 is not interchangeable with a JET machine, and a part sold specifically for the JET or Barista Touch Impress (BES881) line is likewise not guaranteed to fit the BES880 - always look for BES880 or Barista Touch named in the listing.
Check price on Amazon
Report compatibility issue

Bottomless portafilters

Full guide →
54mm Bottomless Portafilter Compatible with Breville Barista Express, Pro, Touch, Bambino Plus & Infuser – Naked Portafilter with 18g Precision Basket – Ergonomic Rosewood Handle | BRESYIA
54mm Bottomless Portafilter Compatible with Breville Barista Express, Pro, Touch, Bambino Plus & Infuser – Naked Portafilter with 18g Precision Basket – Ergonomic Rosewood Handle | BRESYIA
Fits the 54mm group seller says it fits 54mm
Why: Size matches the 54mm Breville Barista Touch group. Listing claims compatibility with Breville machines.
⚠ Check first: Some 54mm IMS and Normcore baskets are listed as fitting the Barista Touch but explicitly note they do NOT fit Breville's 'JET' model, so a basket that fits the BES880 is not interchangeable with a JET machine, and a part sold specifically for the JET or Barista Touch Impress (BES881) line is likewise not guaranteed to fit the BES880 - always look for BES880 or Barista Touch named in the listing.
Check price on Amazon
Report compatibility issue
Bottomless Portafilter 54mm Walnut for Breville Barista Express, Pro, Touch, Bambino Plus | Premium Naked Portafilter | Fits BES870XL, BES878, BES880 | Includes 18–21g Filter Basket
Bottomless Portafilter 54mm Walnut for Breville Barista Express, Pro, Touch, Bambino Plus | Premium Naked Portafilter | Fits BES870XL, BES878, BES880 | Includes 18–21g Filter Basket
Fits the 54mm group seller says it fits 54mm
Why: Size matches the 54mm Breville Barista Touch group. Listing names a Breville model or machine it claims to fit.
⚠ Check first: Some 54mm IMS and Normcore baskets are listed as fitting the Barista Touch but explicitly note they do NOT fit Breville's 'JET' model, so a basket that fits the BES880 is not interchangeable with a JET machine, and a part sold specifically for the JET or Barista Touch Impress (BES881) line is likewise not guaranteed to fit the BES880 - always look for BES880 or Barista Touch named in the listing.
Check price on Amazon
Report compatibility issue
Frossvt 54mm Bottomless Portafilter, Espresso Accessories Compatible with Breville Barista Express, Pro, Touch, Bambino Plus, Infuser, Includes 18g Precision Basket
Frossvt 54mm Bottomless Portafilter, Espresso Accessories Compatible with Breville Barista Express, Pro, Touch, Bambino Plus, Infuser, Includes 18g Precision Basket
Fits the 54mm group seller says it fits 54mm Under $25
Why: Size matches the 54mm Breville Barista Touch group. Listing claims compatibility with Breville machines.
⚠ Check first: Some 54mm IMS and Normcore baskets are listed as fitting the Barista Touch but explicitly note they do NOT fit Breville's 'JET' model, so a basket that fits the BES880 is not interchangeable with a JET machine, and a part sold specifically for the JET or Barista Touch Impress (BES881) line is likewise not guaranteed to fit the BES880 - always look for BES880 or Barista Touch named in the listing.
Check price on Amazon
Report compatibility issue
54mm Bottomless Portafilter with Puck Screen & WDT Tool – Compatible with Breville Barista Express/Pro/Touch, Bambino Plus, Infuser, Duo-Temp Pro, Filter Basket Included and Rosewood Handle
54mm Bottomless Portafilter with Puck Screen & WDT Tool – Compatible with Breville Barista Express/Pro/Touch, Bambino Plus, Infuser, Duo-Temp Pro, Filter Basket Included and Rosewood Handle
Fits the 54mm group seller says it fits 54mm $25–$50
Why: Size matches the 54mm Breville Barista Touch group. Listing claims compatibility with Breville machines.
⚠ Check first: Some 54mm IMS and Normcore baskets are listed as fitting the Barista Touch but explicitly note they do NOT fit Breville's 'JET' model, so a basket that fits the BES880 is not interchangeable with a JET machine, and a part sold specifically for the JET or Barista Touch Impress (BES881) line is likewise not guaranteed to fit the BES880 - always look for BES880 or Barista Touch named in the listing.
Check price on Amazon
Report compatibility issue
54mm Bottomless Portafilter 18-21g Precision Basket with 950 Laser-Cut Holes for High Extraction Compatible for Breville Barista Express, Pro, Touch, Impress, Bambino, Bambino Plus and Infuser
54mm Bottomless Portafilter 18-21g Precision Basket with 950 Laser-Cut Holes for High Extraction Compatible for Breville Barista Express, Pro, Touch, Impress, Bambino, Bambino Plus and Infuser
Fits the 54mm group seller says it fits 54mm $25–$50
Why: Size matches the 54mm Breville Barista Touch group. Listing claims compatibility with Breville machines.
⚠ Check first: Some 54mm IMS and Normcore baskets are listed as fitting the Barista Touch but explicitly note they do NOT fit Breville's 'JET' model, so a basket that fits the BES880 is not interchangeable with a JET machine, and a part sold specifically for the JET or Barista Touch Impress (BES881) line is likewise not guaranteed to fit the BES880 - always look for BES880 or Barista Touch named in the listing.
Check price on Amazon
Report compatibility issue
Normcore 54mm Lay-Flat Bottomless Portafilter with Carbon Fiber Handle, Fits Breville/Sage Barista Series and Bambino Plus, Open-Sided Espresso Portafilter with 18g Basket
Normcore 54mm Lay-Flat Bottomless Portafilter with Carbon Fiber Handle, Fits Breville/Sage Barista Series and Bambino Plus, Open-Sided Espresso Portafilter with 18g Basket
Fits the 54mm group seller says it fits 54mm $50–$100
Why: Size matches the 54mm Breville Barista Touch group. Listing claims compatibility with Breville machines.
⚠ Check first: Some 54mm IMS and Normcore baskets are listed as fitting the Barista Touch but explicitly note they do NOT fit Breville's 'JET' model, so a basket that fits the BES880 is not interchangeable with a JET machine, and a part sold specifically for the JET or Barista Touch Impress (BES881) line is likewise not guaranteed to fit the BES880 - always look for BES880 or Barista Touch named in the listing.
Check price on Amazon
Report compatibility issue

Portafilters

Full guide →
Espresso Portafilter 54mm Double Spout Compatible with Breville Bambino Plus (BES500) Infuser (BES840XL) 54mm Breville Barista Series- Wooden Handle - Stainless Steel Filter Basked Included
Espresso Portafilter 54mm Double Spout Compatible with Breville Bambino Plus (BES500) Infuser (BES840XL) 54mm Breville Barista Series- Wooden Handle - Stainless Steel Filter Basked Included
Fits the 54mm group seller says it fits 54mm $25–$50
Why: Size matches the 54mm Breville Barista Touch group. Listing claims compatibility with Breville machines.
⚠ Check first: Some 54mm IMS and Normcore baskets are listed as fitting the Barista Touch but explicitly note they do NOT fit Breville's 'JET' model, so a basket that fits the BES880 is not interchangeable with a JET machine, and a part sold specifically for the JET or Barista Touch Impress (BES881) line is likewise not guaranteed to fit the BES880 - always look for BES880 or Barista Touch named in the listing.
Check price on Amazon
Report compatibility issue
Espresso Portafilter 54mm Double Spout Compatible with Breville Bambino Plus (BES500) Infuser (BES840XL) 54mm Breville Barista Series-ABS Handle - Stainless Steel Filter Basked Included
Espresso Portafilter 54mm Double Spout Compatible with Breville Bambino Plus (BES500) Infuser (BES840XL) 54mm Breville Barista Series-ABS Handle - Stainless Steel Filter Basked Included
Fits the 54mm group seller says it fits 54mm $25–$50
Why: Size matches the 54mm Breville Barista Touch group. Listing claims compatibility with Breville machines.
⚠ Check first: Some 54mm IMS and Normcore baskets are listed as fitting the Barista Touch but explicitly note they do NOT fit Breville's 'JET' model, so a basket that fits the BES880 is not interchangeable with a JET machine, and a part sold specifically for the JET or Barista Touch Impress (BES881) line is likewise not guaranteed to fit the BES880 - always look for BES880 or Barista Touch named in the listing.
Check price on Amazon
Report compatibility issue
Portafilter 54mm with Double Spout Compatible with Breville Barista Express, Pro, Touch, Bambino, Infuser, Duo Temp and Impress | Wooden Handle
Portafilter 54mm with Double Spout Compatible with Breville Barista Express, Pro, Touch, Bambino, Infuser, Duo Temp and Impress | Wooden Handle
Fits the 54mm group seller says it fits 54mm
Why: Size matches the 54mm Breville Barista Touch group. Listing claims compatibility with Breville machines.
⚠ Check first: Some 54mm IMS and Normcore baskets are listed as fitting the Barista Touch but explicitly note they do NOT fit Breville's 'JET' model, so a basket that fits the BES880 is not interchangeable with a JET machine, and a part sold specifically for the JET or Barista Touch Impress (BES881) line is likewise not guaranteed to fit the BES880 - always look for BES880 or Barista Touch named in the listing.
Check price on Amazon
Report compatibility issue
54mm Portafilter Double Spout Compatible with Breville Bambino Plus (BES500)/ Infuser (BES840XL) 54mm Breville Barista Series-ABS Handle
54mm Portafilter Double Spout Compatible with Breville Bambino Plus (BES500)/ Infuser (BES840XL) 54mm Breville Barista Series-ABS Handle
Fits the 54mm group seller says it fits 54mm $50–$100
Why: Size matches the 54mm Breville Barista Touch group. Listing claims compatibility with Breville machines.
⚠ Check first: Some 54mm IMS and Normcore baskets are listed as fitting the Barista Touch but explicitly note they do NOT fit Breville's 'JET' model, so a basket that fits the BES880 is not interchangeable with a JET machine, and a part sold specifically for the JET or Barista Touch Impress (BES881) line is likewise not guaranteed to fit the BES880 - always look for BES880 or Barista Touch named in the listing.
Check price on Amazon
Report compatibility issue

Distributors

Full guide →
XIXUBU 53mm 2-in-1 Espresso Distributor & Tamper for Breville Barista Express Bambino Plus Duo-Temp Pro - Adjustable Depth, 304 Stainless Steel Barista Coffee Leveler
XIXUBU 53mm 2-in-1 Espresso Distributor & Tamper for Breville Barista Express Bambino Plus Duo-Temp Pro - Adjustable Depth, 304 Stainless Steel Barista Coffee Leveler
Fits the 54mm group seller says it fits 53mm $25–$50
Why: Size matches the 54mm Breville Barista Touch group. Listing claims compatibility with Breville machines.
⚠ Check first: Some 54mm IMS and Normcore baskets are listed as fitting the Barista Touch but explicitly note they do NOT fit Breville's 'JET' model, so a basket that fits the BES880 is not interchangeable with a JET machine, and a part sold specifically for the JET or Barista Touch Impress (BES881) line is likewise not guaranteed to fit the BES880 - always look for BES880 or Barista Touch named in the listing.
Check price on Amazon
Report compatibility issue
MATOW 53mm Coffee Distributor and Tamper, Dual Head Coffee Leveler Compatible with Breville 54mm Portafilter, Adjustable Depth- Professional Espresso Hand Tampers
MATOW 53mm Coffee Distributor and Tamper, Dual Head Coffee Leveler Compatible with Breville 54mm Portafilter, Adjustable Depth- Professional Espresso Hand Tampers
Fits the 54mm group seller says it fits 53/54mm $25–$50
Why: Size matches the 54mm Breville Barista Touch group. Listing claims compatibility with Breville machines.
⚠ Check first: Some 54mm IMS and Normcore baskets are listed as fitting the Barista Touch but explicitly note they do NOT fit Breville's 'JET' model, so a basket that fits the BES880 is not interchangeable with a JET machine, and a part sold specifically for the JET or Barista Touch Impress (BES881) line is likewise not guaranteed to fit the BES880 - always look for BES880 or Barista Touch named in the listing.
Check price on Amazon
Report compatibility issue
53mm Coffee Distributor, Espresso Distribution Tool, Coffee Leveler Compatible with Breville 54mm Portafilter
53mm Coffee Distributor, Espresso Distribution Tool, Coffee Leveler Compatible with Breville 54mm Portafilter
Fits the 54mm group seller says it fits 53/54mm Under $25
Why: Size matches the 54mm Breville Barista Touch group. Listing claims compatibility with Breville machines.
⚠ Check first: Some 54mm IMS and Normcore baskets are listed as fitting the Barista Touch but explicitly note they do NOT fit Breville's 'JET' model, so a basket that fits the BES880 is not interchangeable with a JET machine, and a part sold specifically for the JET or Barista Touch Impress (BES881) line is likewise not guaranteed to fit the BES880 - always look for BES880 or Barista Touch named in the listing.
Check price on Amazon
Report compatibility issue
MATOW 53mm Coffee Distributor, Espresso Distribution Tool, Coffee Leveler Compatible with Breville 54mm Portafilter- Professional Espresso Distributor Leveler Tool
MATOW 53mm Coffee Distributor, Espresso Distribution Tool, Coffee Leveler Compatible with Breville 54mm Portafilter- Professional Espresso Distributor Leveler Tool
Fits the 54mm group seller says it fits 53/54mm $25–$50
Why: Size matches the 54mm Breville Barista Touch group. Listing claims compatibility with Breville machines.
⚠ Check first: Some 54mm IMS and Normcore baskets are listed as fitting the Barista Touch but explicitly note they do NOT fit Breville's 'JET' model, so a basket that fits the BES880 is not interchangeable with a JET machine, and a part sold specifically for the JET or Barista Touch Impress (BES881) line is likewise not guaranteed to fit the BES880 - always look for BES880 or Barista Touch named in the listing.
Check price on Amazon
Report compatibility issue
54mm Espresso Distribution Tool Walnut Coffee Distributor Adjustable Depth Stainless Steel Espresso Leveler Compatible with Breville Espresso Machines
54mm Espresso Distribution Tool Walnut Coffee Distributor Adjustable Depth Stainless Steel Espresso Leveler Compatible with Breville Espresso Machines
Fits the 54mm group seller says it fits 54mm $25–$50
Why: Size matches the 54mm Breville Barista Touch group. Listing claims compatibility with Breville machines.
⚠ Check first: Some 54mm IMS and Normcore baskets are listed as fitting the Barista Touch but explicitly note they do NOT fit Breville's 'JET' model, so a basket that fits the BES880 is not interchangeable with a JET machine, and a part sold specifically for the JET or Barista Touch Impress (BES881) line is likewise not guaranteed to fit the BES880 - always look for BES880 or Barista Touch named in the listing.
Check price on Amazon
Report compatibility issue

Shower screens

Full guide →
IMS Precision Nanotech Shower Screen compatible with 54mm Breville Sage Espresso machines Express, Bambino, Bambino Plus, Impress, Barista Touch, Infuser, Duo Temp.(BV200NT)
IMS Precision Nanotech Shower Screen compatible with 54mm Breville Sage Espresso machines Express, Bambino, Bambino Plus, Impress, Barista Touch, Infuser, Duo Temp.(BV200NT)
Fits the 54mm group seller says it fits 54mm $25–$50
Why: Size matches the 54mm Breville Barista Touch group. Listing names a Breville model or machine it claims to fit.
⚠ Check first: Some 54mm IMS and Normcore baskets are listed as fitting the Barista Touch but explicitly note they do NOT fit Breville's 'JET' model, so a basket that fits the BES880 is not interchangeable with a JET machine, and a part sold specifically for the JET or Barista Touch Impress (BES881) line is likewise not guaranteed to fit the BES880 - always look for BES880 or Barista Touch named in the listing.
Check price on Amazon
Report compatibility issue
IMS Precision Shower Screen BV200IM and Cafelat Silicone Gasket. 3 Piece Set made for 54mm Breville and Sage Espresso machines.
IMS Precision Shower Screen BV200IM and Cafelat Silicone Gasket. 3 Piece Set made for 54mm Breville and Sage Espresso machines.
Fits the 54mm group seller says it fits 54mm $25–$50
Why: Size matches the 54mm Breville Barista Touch group. Listing claims compatibility with Breville machines.
⚠ Check first: Some 54mm IMS and Normcore baskets are listed as fitting the Barista Touch but explicitly note they do NOT fit Breville's 'JET' model, so a basket that fits the BES880 is not interchangeable with a JET machine, and a part sold specifically for the JET or Barista Touch Impress (BES881) line is likewise not guaranteed to fit the BES880 - always look for BES880 or Barista Touch named in the listing.
Check price on Amazon
Report compatibility issue
IMS Precision Shower Screen BV200IM compatible with 54mm Breville Sage Espresso machines Express, Barista Pro, Bambino, Bambino Plus, Impress, Barista Touch, Infuser, Duo Temp
IMS Precision Shower Screen BV200IM compatible with 54mm Breville Sage Espresso machines Express, Barista Pro, Bambino, Bambino Plus, Impress, Barista Touch, Infuser, Duo Temp
Fits the 54mm group seller says it fits 54mm $25–$50
Why: Size matches the 54mm Breville Barista Touch group. Listing names a Breville model or machine it claims to fit.
⚠ Check first: Some 54mm IMS and Normcore baskets are listed as fitting the Barista Touch but explicitly note they do NOT fit Breville's 'JET' model, so a basket that fits the BES880 is not interchangeable with a JET machine, and a part sold specifically for the JET or Barista Touch Impress (BES881) line is likewise not guaranteed to fit the BES880 - always look for BES880 or Barista Touch named in the listing.
Check price on Amazon
Report compatibility issue
Compatible for Breville Express Bambino Plus Barista Touch Infuser 54mm Shower Screen Seal Gasket
Compatible for Breville Express Bambino Plus Barista Touch Infuser 54mm Shower Screen Seal Gasket
Fits the 54mm group seller says it fits 54mm
Why: Size matches the 54mm Breville Barista Touch group. Listing names a Breville model or machine it claims to fit.
⚠ Check first: Some 54mm IMS and Normcore baskets are listed as fitting the Barista Touch but explicitly note they do NOT fit Breville's 'JET' model, so a basket that fits the BES880 is not interchangeable with a JET machine, and a part sold specifically for the JET or Barista Touch Impress (BES881) line is likewise not guaranteed to fit the BES880 - always look for BES880 or Barista Touch named in the listing.
Check price on Amazon
Report compatibility issue

Gaskets

Full guide →
54mm Cafelat Silicone Gasket for Breville Sage Barista Pro, Express, Bambino Plus, Impress, Barista Touch, Infuser, Infuse, Perfetta, Barista Perfetta Plus.
54mm Cafelat Silicone Gasket for Breville Sage Barista Pro, Express, Bambino Plus, Impress, Barista Touch, Infuser, Infuse, Perfetta, Barista Perfetta Plus.
Fits the 54mm group seller says it fits 54mm Under $25
Why: Size matches the 54mm Breville Barista Touch group. Listing names a Breville model or machine it claims to fit.
⚠ Check first: Some 54mm IMS and Normcore baskets are listed as fitting the Barista Touch but explicitly note they do NOT fit Breville's 'JET' model, so a basket that fits the BES880 is not interchangeable with a JET machine, and a part sold specifically for the JET or Barista Touch Impress (BES881) line is likewise not guaranteed to fit the BES880 - always look for BES880 or Barista Touch named in the listing.
Check price on Amazon
Report compatibility issue
2PCS 54mm Silicone Steam Ring for Breville Espresso Machine 878/870/860/880/810/840/450/500 and Sage 880/878/875/870/810/500, Breville Espresso Machine Accessories Grouphead Gasket Replacement Part
2PCS 54mm Silicone Steam Ring for Breville Espresso Machine 878/870/860/880/810/840/450/500 and Sage 880/878/875/870/810/500, Breville Espresso Machine Accessories Grouphead Gasket Replacement Part
Fits the 54mm group seller says it fits 54mm Under $25
Why: Size matches the 54mm Breville Barista Touch group. Listing claims compatibility with Breville machines.
⚠ Check first: Some 54mm IMS and Normcore baskets are listed as fitting the Barista Touch but explicitly note they do NOT fit Breville's 'JET' model, so a basket that fits the BES880 is not interchangeable with a JET machine, and a part sold specifically for the JET or Barista Touch Impress (BES881) line is likewise not guaranteed to fit the BES880 - always look for BES880 or Barista Touch named in the listing.
Check price on Amazon
Report compatibility issue

Dosing funnels

Full guide →
54mm Dosing Funnel, Twist-Lock Portafilter Funnel Compatible with Breville Barista Express, Pro, Touch, Bambino, Bambino Plus, Infuser, Duo-Temp Pro Espresso Machines
54mm Dosing Funnel, Twist-Lock Portafilter Funnel Compatible with Breville Barista Express, Pro, Touch, Bambino, Bambino Plus, Infuser, Duo-Temp Pro Espresso Machines
Fits the 54mm group seller says it fits 54mm Under $25
Why: Size matches the 54mm Breville Barista Touch group. Listing claims compatibility with Breville machines.
⚠ Check first: Some 54mm IMS and Normcore baskets are listed as fitting the Barista Touch but explicitly note they do NOT fit Breville's 'JET' model, so a basket that fits the BES880 is not interchangeable with a JET machine, and a part sold specifically for the JET or Barista Touch Impress (BES881) line is likewise not guaranteed to fit the BES880 - always look for BES880 or Barista Touch named in the listing.
Check price on Amazon
Report compatibility issue
Breville 54mm Dosing Funnel Only for Use with Breville Barista and Bambino Espresso Machine Models
Breville 54mm Dosing Funnel Only for Use with Breville Barista and Bambino Espresso Machine Models
Fits the 54mm group seller says it fits 54mm Under $25
Why: Size matches the 54mm Breville Barista Touch group. Listing claims compatibility with Breville machines.
⚠ Check first: Some 54mm IMS and Normcore baskets are listed as fitting the Barista Touch but explicitly note they do NOT fit Breville's 'JET' model, so a basket that fits the BES880 is not interchangeable with a JET machine, and a part sold specifically for the JET or Barista Touch Impress (BES881) line is likewise not guaranteed to fit the BES880 - always look for BES880 or Barista Touch named in the listing.
Check price on Amazon
Report compatibility issue
CAFE HOME SHOP 54mm Dosing Funnel for Breville Portafilters
CAFE HOME SHOP 54mm Dosing Funnel for Breville Portafilters
Fits the 54mm group seller says it fits 54mm Under $25
Why: Size matches the 54mm Breville Barista Touch group. Listing claims compatibility with Breville machines.
⚠ Check first: Some 54mm IMS and Normcore baskets are listed as fitting the Barista Touch but explicitly note they do NOT fit Breville's 'JET' model, so a basket that fits the BES880 is not interchangeable with a JET machine, and a part sold specifically for the JET or Barista Touch Impress (BES881) line is likewise not guaranteed to fit the BES880 - always look for BES880 or Barista Touch named in the listing.
Check price on Amazon
Report compatibility issue
Optional extras

WDT tools

Full guide →
Aieve WDT Tool Espresso, Magnetic Coffee Distribution Tool Compatible with Ninja Luxe Cafe, 10 Needle Coffee Stirrer for Breville Barista Espresso Accessories (Magnetic & Adhesive Mount)
Aieve WDT Tool Espresso, Magnetic Coffee Distribution Tool Compatible with Ninja Luxe Cafe, 10 Needle Coffee Stirrer for Breville Barista Espresso Accessories (Magnetic & Adhesive Mount)
Fits this machine seller says it fits Under $25
Why: Breville-branded accessory; the seller ties it to Breville machines but names no specific model.
Check price on Amazon
Report compatibility issue
Upgraded WDT Tool with Strong Magnetic for Breville Barista Espresso Coffee Maker, Espresso Distribution Tool Espresso Accessories for Ninja Luxe Cafe Accessories
Upgraded WDT Tool with Strong Magnetic for Breville Barista Espresso Coffee Maker, Espresso Distribution Tool Espresso Accessories for Ninja Luxe Cafe Accessories
Fits this machine seller says it fits
Why: Breville-branded accessory; the seller ties it to Breville machines but names no specific model.
Check price on Amazon
Report compatibility issue
WDT Espresso Distribution Tool Espresso Stirrer Tools for Barista, 0.35mm 7 Needles Espresso Coffee Stirrer with Extra 7 Replaceable Needles, Aluminum Alloy Handle with Stand (Black)
WDT Espresso Distribution Tool Espresso Stirrer Tools for Barista, 0.35mm 7 Needles Espresso Coffee Stirrer with Extra 7 Replaceable Needles, Aluminum Alloy Handle with Stand (Black)
Universal - fits most machines universal item Under $25
Why: Universal accessory - works with most machines including this one.
Check price on Amazon
Report compatibility issue
Jeymei WDT Espresso Distribution Tool,Espresso Whisk with 8 Extra 0.35mm 304 Stainless Steel Needles，Espresso Comb Tool for Barista Black Coffee Ground Stirrer
Jeymei WDT Espresso Distribution Tool,Espresso Whisk with 8 Extra 0.35mm 304 Stainless Steel Needles，Espresso Comb Tool for Barista Black Coffee Ground Stirrer
Universal - fits most machines universal item Under $25
Why: Universal accessory - works with most machines including this one.
Check price on Amazon
Report compatibility issue

Milk jugs

Full guide →
Breville BES003 Temp Control Milk Jug Espresso Accessory for Creating Latte Art
Breville BES003 Temp Control Milk Jug Espresso Accessory for Creating Latte Art
Fits this machine seller says it fits Under $25
Why: Breville-branded accessory; the seller ties it to Breville machines but names no specific model.
Check price on Amazon
Report compatibility issue
De'Longhi DLSC060 Milk Frothing Jug, 12 oz, Stainless Steel
De'Longhi DLSC060 Milk Frothing Jug, 12 oz, Stainless Steel
Universal - fits most machines universal item Under $25
Why: Universal accessory - works with most machines including this one.
Check price on Amazon
Report compatibility issue

Cleaning discs

Full guide →
54mm Cleaning Disc for Breville 2 Pack Espresso Backflush Cleaning Disc for Breville Compatible with Bes870XL/ Bes860XL/Bes840XL/Bes450,etc
54mm Cleaning Disc for Breville 2 Pack Espresso Backflush Cleaning Disc for Breville Compatible with Bes870XL/ Bes860XL/Bes840XL/Bes450,etc
Fits the 54mm group seller says it fits 54mm
Why: Size matches the 54mm Breville Barista Touch group. Listing claims compatibility with Breville machines.
⚠ Check first: Some 54mm IMS and Normcore baskets are listed as fitting the Barista Touch but explicitly note they do NOT fit Breville's 'JET' model, so a basket that fits the BES880 is not interchangeable with a JET machine, and a part sold specifically for the JET or Barista Touch Impress (BES881) line is likewise not guaranteed to fit the BES880 - always look for BES880 or Barista Touch named in the listing.
Check price on Amazon
Report compatibility issue

Scales

Full guide →
Ultrean Mini Coffee Scale with Timer, Rechargeable Espresso Scale, 2kg/0.1g Accurate Scale for Espresso and Pour-Over Coffee, Portable Digital Kitchen Scale with 3 Brewing Modes
Ultrean Mini Coffee Scale with Timer, Rechargeable Espresso Scale, 2kg/0.1g Accurate Scale for Espresso and Pour-Over Coffee, Portable Digital Kitchen Scale with 3 Brewing Modes
Universal - fits most machines universal item Under $25
Why: Universal accessory - works with most machines including this one.
Check price on Amazon
Report compatibility issue

Puck screens

Full guide →
54mm Dosing Funnel Espresso Puck Screen Set KNODOS Grinder Trigger Portafilter Funnel and Filter Compatible with Breville 54mm Portafilters
54mm Dosing Funnel Espresso Puck Screen Set KNODOS Grinder Trigger Portafilter Funnel and Filter Compatible with Breville 54mm Portafilters
Fits the 54mm group seller says it fits 54mm Under $25
Why: Size matches the 54mm Breville Barista Touch group. Listing claims compatibility with Breville machines.
⚠ Check first: Some 54mm IMS and Normcore baskets are listed as fitting the Barista Touch but explicitly note they do NOT fit Breville's 'JET' model, so a basket that fits the BES880 is not interchangeable with a JET machine, and a part sold specifically for the JET or Barista Touch Impress (BES881) line is likewise not guaranteed to fit the BES880 - always look for BES880 or Barista Touch named in the listing.
Check price on Amazon
Report compatibility issue
Meet Great- 2 Packs 53.3mm Espresso Puck Screen, 1.7mm Thickness 150μm 316L Stainless Steel, Upgraded Reusable Coffee Filter Screen for 54mm Breville Portafilter Filter Basket
Meet Great- 2 Packs 53.3mm Espresso Puck Screen, 1.7mm Thickness 150μm 316L Stainless Steel, Upgraded Reusable Coffee Filter Screen for 54mm Breville Portafilter Filter Basket
Fits the 54mm group seller says it fits 54mm Under $25
Why: Size matches the 54mm Breville Barista Touch group. Listing claims compatibility with Breville machines.
⚠ Check first: Some 54mm IMS and Normcore baskets are listed as fitting the Barista Touch but explicitly note they do NOT fit Breville's 'JET' model, so a basket that fits the BES880 is not interchangeable with a JET machine, and a part sold specifically for the JET or Barista Touch Impress (BES881) line is likewise not guaranteed to fit the BES880 - always look for BES880 or Barista Touch named in the listing.
Check price on Amazon
Report compatibility issue
Normcore 53.3mm Puck Screen - Lower Shower Screen - Metal Contact Screen for Espresso 54mm Portafilter Filter Basket - 1.7mm Thickness 150μm - 316 Stainless Steel
Normcore 53.3mm Puck Screen - Lower Shower Screen - Metal Contact Screen for Espresso 54mm Portafilter Filter Basket - 1.7mm Thickness 150μm - 316 Stainless Steel
Fits the 54mm group inferred from size 54mm Under $25
Why: Size matches the 54mm Breville Barista Touch group. Compatibility inferred from size; not stated by the listing.
⚠ Check first: Some 54mm IMS and Normcore baskets are listed as fitting the Barista Touch but explicitly note they do NOT fit Breville's 'JET' model, so a basket that fits the BES880 is not interchangeable with a JET machine, and a part sold specifically for the JET or Barista Touch Impress (BES881) line is likewise not guaranteed to fit the BES880 - always look for BES880 or Barista Touch named in the listing.
Check price on Amazon
Report compatibility issue
Normcore 53.3mm Puck Screen, 0.8mm Thickness, Lower Shower Screen, Reusable Metal Filter for Breville Sage 54mm Portafilter Basket, 316 Stainless Steel
Normcore 53.3mm Puck Screen, 0.8mm Thickness, Lower Shower Screen, Reusable Metal Filter for Breville Sage 54mm Portafilter Basket, 316 Stainless Steel
Fits the 54mm group seller says it fits 54mm $25–$50
Why: Size matches the 54mm Breville Barista Touch group. Listing claims compatibility with Breville machines.
⚠ Check first: Some 54mm IMS and Normcore baskets are listed as fitting the Barista Touch but explicitly note they do NOT fit Breville's 'JET' model, so a basket that fits the BES880 is not interchangeable with a JET machine, and a part sold specifically for the JET or Barista Touch Impress (BES881) line is likewise not guaranteed to fit the BES880 - always look for BES880 or Barista Touch named in the listing.
Check price on Amazon
Report compatibility issue
Aieve Espresso Paper Filter Compatible with Breville Barista Coffee Maker, 54 mm Portafilter Paper Filter Puck Screen Espresso Accessories (400 Pcs)
Aieve Espresso Paper Filter Compatible with Breville Barista Coffee Maker, 54 mm Portafilter Paper Filter Puck Screen Espresso Accessories (400 Pcs)
Fits the 54mm group seller says it fits 54mm Under $25
Why: Size matches the 54mm Breville Barista Touch group. Listing claims compatibility with Breville machines.
⚠ Check first: Some 54mm IMS and Normcore baskets are listed as fitting the Barista Touch but explicitly note they do NOT fit Breville's 'JET' model, so a basket that fits the BES880 is not interchangeable with a JET machine, and a part sold specifically for the JET or Barista Touch Impress (BES881) line is likewise not guaranteed to fit the BES880 - always look for BES880 or Barista Touch named in the listing.
Check price on Amazon
Report compatibility issue
Breville Espresso Machine Accessories Set 54mm Tamping Station, Wdt Tool, Dosing Funnel, Espresso Tamper, Puck Screen and Distribution Tool
Breville Espresso Machine Accessories Set 54mm Tamping Station, Wdt Tool, Dosing Funnel, Espresso Tamper, Puck Screen and Distribution Tool
Fits the 54mm group seller says it fits 54mm
Why: Size matches the 54mm Breville Barista Touch group. Listing claims compatibility with Breville machines.
⚠ Check first: Some 54mm IMS and Normcore baskets are listed as fitting the Barista Touch but explicitly note they do NOT fit Breville's 'JET' model, so a basket that fits the BES880 is not interchangeable with a JET machine, and a part sold specifically for the JET or Barista Touch Impress (BES881) line is likewise not guaranteed to fit the BES880 - always look for BES880 or Barista Touch named in the listing.
Check price on Amazon
Report compatibility issue

Organizers

Full guide →
Magnetic Espresso Accessory Organizer Caddy for Breville Bambino Plus – Tray Holder for Tamper, Distributor, Portafilter
Magnetic Espresso Accessory Organizer Caddy for Breville Bambino Plus – Tray Holder for Tamper, Distributor, Portafilter
Fits this machine seller says it fits
Why: Breville-branded accessory; the seller ties it to Breville machines but names no specific model.
Check price on Amazon
Report compatibility issue
Compatible with Breville Bambino Plus Magnetic Storage Stand - 54mm Espresso Accessory Organizer for Tamper, Dosing Tool & Small Accessories Organization
Compatible with Breville Bambino Plus Magnetic Storage Stand - 54mm Espresso Accessory Organizer for Tamper, Dosing Tool & Small Accessories Organization
Fits this machine seller says it fits 54mm
Why: Breville-branded accessory; the seller ties it to Breville machines but names no specific model.
Check price on Amazon
Report compatibility issue
Coffee Machine Storage Stand Compatible with the Breville Bambino Plus Holds a Tamper, Distributor, and Portafilter
Coffee Machine Storage Stand Compatible with the Breville Bambino Plus Holds a Tamper, Distributor, and Portafilter
Fits this machine seller says it fits
Why: Breville-branded accessory; the seller ties it to Breville machines but names no specific model.
Check price on Amazon
Report compatibility issue
Magnetic Espresso Accessory Organizer Caddy Works with Breville Bambino Plus – Side Workstation Workbench, Holds Tamper, Hangs Portafilter, Organizes Extra Grounds Grids (White)
Magnetic Espresso Accessory Organizer Caddy Works with Breville Bambino Plus – Side Workstation Workbench, Holds Tamper, Hangs Portafilter, Organizes Extra Grounds Grids (White)
Fits this machine seller says it fits
Why: Breville-branded accessory; the seller ties it to Breville machines but names no specific model.
Check price on Amazon
Report compatibility issue
Walnut Espresso Tamping Station 54mm for Breville – Coffee Accessories Organizer Tamper, Distributor Portafilter Holder Stand, Espresso Tools Storage
Walnut Espresso Tamping Station 54mm for Breville – Coffee Accessories Organizer Tamper, Distributor Portafilter Holder Stand, Espresso Tools Storage
Fits this machine seller says it fits 54mm $50–$100
Why: Breville-branded accessory; the seller ties it to Breville machines but names no specific model.
Check price on Amazon
Report compatibility issue
Magnetic Portafilter Holder for Metal Wall Surface, Espresso Accessories Organizer Tools Compatible with Ninja Luxe Cafe, Breville, Casabrews Espresso Machine
Magnetic Portafilter Holder for Metal Wall Surface, Espresso Accessories Organizer Tools Compatible with Ninja Luxe Cafe, Breville, Casabrews Espresso Machine
Fits this machine seller says it fits Under $25
Why: Breville-branded accessory; the seller ties it to Breville machines but names no specific model.
Check price on Amazon
Report compatibility issue

Protective mats

Full guide →
Top Protective Pad Compatible with Breville Bambino Plus, for Heat Resistance, Spill Protection & Non-Slip Stability (White)
Top Protective Pad Compatible with Breville Bambino Plus, for Heat Resistance, Spill Protection & Non-Slip Stability (White)
Fits this machine seller says it fits
Why: Breville-branded accessory; the seller ties it to Breville machines but names no specific model.
Check price on Amazon
Report compatibility issue
Coffee Maker Top Mat for Breville Bambino Plus Coffee Machine Top Protective Pad (White)
Coffee Maker Top Mat for Breville Bambino Plus Coffee Machine Top Protective Pad (White)
Fits this machine seller says it fits
Why: Breville-branded accessory; the seller ties it to Breville machines but names no specific model.
Check price on Amazon
Report compatibility issue
Coffee Machine Top Protective Mat，Compatible For Breville，Compatible For Bambino， Plus(A)
Coffee Machine Top Protective Mat，Compatible For Breville，Compatible For Bambino， Plus(A)
Fits this machine seller says it fits
Why: Breville-branded accessory; the seller ties it to Breville machines but names no specific model.
Check price on Amazon
Report compatibility issue
Sliding Mat Top Protective Pad For Breville Bambino Plus,Coffee Machine Anti-Slip Glide Mat Top Dustproof Cover Pad For Breville Bambino Plus (White)
Sliding Mat Top Protective Pad For Breville Bambino Plus,Coffee Machine Anti-Slip Glide Mat Top Dustproof Cover Pad For Breville Bambino Plus (White)
Fits this machine seller says it fits
Why: Breville-branded accessory; the seller ties it to Breville machines but names no specific model.
Check price on Amazon
Report compatibility issue
3D Printed PLA Protective Top Pad for Breville Bambino Plus Espresso Machine, Anti-Scratch Dust-Proof Coffee Machine Accessories (White)
3D Printed PLA Protective Top Pad for Breville Bambino Plus Espresso Machine, Anti-Scratch Dust-Proof Coffee Machine Accessories (White)
Fits this machine seller says it fits
Why: Breville-branded accessory; the seller ties it to Breville machines but names no specific model.
Check price on Amazon
Report compatibility issue
Silicone Coffee Machine Mat for Breville Bambino Plus BES500 2018–2026, 23.62''x 15.75'' Water Resistant Non-Slip Bar Mat with Detachable Dish Drying Mat for Coffee Maker, Pot, Dish Rack
Silicone Coffee Machine Mat for Breville Bambino Plus BES500 2018–2026, 23.62''x 15.75'' Water Resistant Non-Slip Bar Mat with Detachable Dish Drying Mat for Coffee Maker, Pot, Dish Rack
Fits this machine seller says it fits
Why: Breville-branded accessory; the seller ties it to Breville machines but names no specific model.
Check price on Amazon
Report compatibility issue

Breville Barista Touch questions

What size accessories fit the Breville Barista Touch?

The Breville Barista Touch uses a nominal 54mm system. Portafilter bodies must also match its breville-54 locking geometry; diameter alone does not prove fit.

What should I check before changing the Breville Barista Touch basket?

The included dual-wall (pressurized) basket masks grind and dose problems and is meant for pre-ground coffee, so switch to the single-wall basket to actually dial in a fresh grind.

Does the Breville Barista Touch need a separate grinder?

It has a built-in grinder. A standalone grinder is optional; consider one only when the integrated grinder's adjustment range or workflow is the limiting factor.

Affiliate disclosure: this page contains affiliate links. If you buy through them we may earn a commission at no extra cost to you. We have not physically tested these products; all compatibility analysis is based on manufacturer specifications and publicly available listing data. "Seller-claimed" means a marketplace listing asserts the fit; it is not manufacturer-confirmed. Verify size against your machine before purchase.